BP2 Getting Started

Resources

ByPic Firmware Download page *

* The firmware for this device is called BV513_V2

The BP2 is an Arduino shaped board similar to the BP1. The software from the BP1 is full compatible with this device and so this offers an upgrade path as there is 512k of flash available and it runs at 80MHz. Because there is more I/O the inner pads also connect to I/O as well as the socketed outer pads. Because of the extra space available the BP2 will also support floating point and large (64bit) integers.

To get connect to a USB to serial device, get started with the IDE and see how things work, follow this link.